Using LDAP Authentication with TLS/SSL v7.4

You can control access to WarehousePG with an LDAP server and, optionally, secure the connection with encryption by adding parameters to pg_hba.conf file entries.

WarehousePG supports LDAP authentication with the TLS/SSL protocol to encrypt communication with an LDAP server:

• LDAP authentication with STARTTLS and TLS protocol – STARTTLS starts with a clear text connection (no encryption) and upgrades it to a secure connection (with encryption).
• LDAP authentication with a secure connection and TLS/SSL (LDAPS) – WarehousePG uses the TLS or SSL protocol based on the protocol that is used by the LDAP server.

If no protocol is specified, WarehousePG communicates with the LDAP server with a clear text connection.

To use LDAP authentication, the WarehousePG coordinator host must be configured as an LDAP client. See your LDAP documentation for information about configuring LDAP clients.

Enabling LDAP Authentication with STARTTLS and TLS

To enable STARTTLS with the TLS protocol, in the pg_hba.conf file, add an ldap line and specify the ldaptls parameter with the value 1. The default port is 389. In this example, the authentication method parameters include the ldaptls parameter.

ldap ldapserver=myldap.com ldaptls=1 ldapprefix="uid=" ldapsuffix=",ou=People,dc=example,dc=com"

Specify a non-default port with the ldapport parameter. In this example, the authentication method includes the ldaptls parameter and the ldapport parameter to specify the port 500.

ldap ldapserver=myldap.com ldaptls=1 ldapport=500 ldapprefix="uid=" ldapsuffix=",ou=People,dc=example,dc=com"

Enabling LDAP Authentication with a Secure Connection and TLS/SSL

To enable a secure connection with TLS/SSL, add ldaps:// as the prefix to the LDAP server name specified in the ldapserver parameter. The default port is 636.

This example ldapserver parameter specifies a secure connection and the TLS/SSL protocol for the LDAP server myldap.com.

ldapserver=ldaps://myldap.com

To specify a non-default port, add a colon (:) and the port number after the LDAP server name. This example ldapserver parameter includes the ldaps:// prefix and the non-default port 550.

ldapserver=ldaps://myldap.com:550

Configuring Authentication with a System-wide OpenLDAP System

If you have a system-wide OpenLDAP system and logins are configured to use LDAP with TLS or SSL in the pg_hba.conf file, logins may fail with the following message:

could not start LDAP TLS session: error code '-11'

To use an existing OpenLDAP system for authentication, WarehousePG must be set up to use the LDAP server's CA certificate to validate user certificates. Follow these steps on both the coordinator and standby hosts to configure WarehousePG:

1. Copy the base64-encoded root CA chain file from the Active Directory or LDAP server to the WarehousePG coordinator and standby coordinator hosts. This example uses the directory /etc/pki/tls/certs.

2. Change to the directory where you copied the CA certificate file and, as the root user, generate the hash for OpenLDAP:

   → WrapCopy

   # cd /etc/pki/tls/certs  
   # openssl x509 -noout -hash -in <ca-certificate-file>  
   # ln -s <ca-certificate-file> <ca-certificate-file>.0

3. Configure an OpenLDAP configuration file for WarehousePG with the CA certificate directory and certificate file specified.

   As the root user, edit the OpenLDAP configuration file /etc/openldap/ldap.conf:

   → WrapCopy

   SASL_NOCANON on
    URI ldaps://ldapA.example.priv ldaps://ldapB.example.priv ldaps://ldapC.example.priv
    BASE dc=example,dc=priv
    TLS_CACERTDIR /etc/pki/tls/certs
    TLS_CACERT /etc/pki/tls/certs/<ca-certificate-file>

   Note For certificate validation to succeed, the hostname in the certificate must match a hostname in the URI property. Otherwise, you must also add TLS_REQCERT allow to the file.

4. As the gpadmin user, edit /usr/edb/whpg7/greenplum_path.sh and add the following line.

   → WrapCopy

   export LDAPCONF=/etc/openldap/ldap.conf

Notes

WarehousePG logs an error if the following are specified in an pg_hba.conf file entry:

• If both the ldaps:// prefix and the ldaptls=1 parameter are specified.
• If both the ldaps:// prefix and the ldapport parameter are specified.

Enabling encrypted communication for LDAP authentication only encrypts the communication between WarehousePG and the LDAP server.

See Encrypting Client/Server Connections for information about encrypting client connections.

Examples

These are example entries from an pg_hba.conf file.

This example specifies LDAP authentication with no encryption between WarehousePG and the LDAP server.

host all plainuser 0.0.0.0/0 ldap ldapserver=myldap.com ldapprefix="uid=" ldapsuffix=",ou=People,dc=example,dc=com"

This example specifies LDAP authentication with the STARTTLS and TLS protocol between WarehousePG and the LDAP server.

host all tlsuser 0.0.0.0/0 ldap ldapserver=myldap.com ldaptls=1 ldapprefix="uid=" ldapsuffix=",ou=People,dc=example,dc=com" 

This example specifies LDAP authentication with a secure connection and TLS/SSL protocol between WarehousePG and the LDAP server.

host all ldapsuser 0.0.0.0/0 ldap ldapserver=myldap.com ldapscheme=ldaps ldapprefix="uid=" ldapsuffix=",ou=People,dc=example,dc=com"

This example also specifies LDAP authentication with a secure connection and TLS/SSL protocol between WarehousePG and the LDAP server, using an alternative syntax.

host all ldapsuser 0.0.0.0/0 ldap ldapurl=ldaps://myldap.com ldapprefix="uid=" ldapsuffix=",ou=People,dc=example,dc=com" 

Parent topic: Configuring Client Authentication